UGREEN 2 in 1 out KVM HDMI Switch Box Selector Splitter for PC Monitor Projector Keyboard Mouse

• Powerful HDMI USB KVM switch HDMI + USB KVM switch allows you to control up to 2 HDMI-enabled host devices (such as computers, for PS4, for PS3, for Xbox One, TV box) using only one set of keyboard, mouse and monitor ), is the ideal choice to save space and cost to improve PC management efficiency

• In addition, you can share printers, scanners, U disks, flash drives with 2pcs through its USB 2.0 hub

• It is very suitable for SOHO, games, multimedia production workstations and monitoring rooms

• The 2-port HDMI switch 4K HDMI KVM switch box is compatible with HDMI 1.4 and HDCP 1.4, and supports resolutions up to 4K @ 30HZ. The same goes backward for 1080P, 1080i, 720P, 480P, 480i

• With the advanced ITE66332 HDMI chipset, the switch supports 4K signals (up to 5 meters). Simultaneous transmission of video signals and audio signals. And supports DTS, AC3, DSD 5.1 / 7.1 and other audio formats

• With this HDMI switch, you can enjoy the most luxurious video and audio

Specification:

• Input: 2 HDMI and 2 USB 2.0

• Output: 1 x HDMI?2 * USB A?2 x USB 2.0

• Resolution: 4K @ 30HZ

• EAN / UPC 6957303857449

How to switch between two HDMI input devices:

• Press the switch button on the KVM box

• Use keyboard hotkeys-double-click the Ctrl key (or scroll key), and then click "1" on the numeric keypad to switch to PC1 or click "2" to PC2

• Auto scan switch-double click the Ctrl button (or scroll button), then click "S" to start the auto scan switch mode. You can press any button to end the operation. In addition, you can set an automatic switching timer between 10s and 999s, which is very suitable for monitoring

How to use HDMI USB KVM switch:

• Connect HDMI IN1 and USB IN1 to PC1 at the same time

• Connect HDMI IN2 and USB IN2 to PC2 at the same time

• Connect HDMI Ouput to HDMI monitor/TV/display

• Connect the USB keyboard and mouse to the USB 1.1 A port

• Connect the printer, U disk or other USB devices to the USB 2.0 A port to achieve faster data exchange

• Press the manual switch button to switch between the two computers

Note:

• Please make sure that the HDMI input connector 1 and USB B connector 1 are plugged into the same host. HDMI IN1 and USB IN1 are corresponding. Mixed insertion of HDMI IN1 and USB IN2 is not supported

• Only supports resolutions up to 4K @ 30Hz, not 4K @ 60Hz. Please adjust the resolution to a compatible resolution

• A USB cable must be used to connect the HDMI input device to the USB IN port of the KVM switch. Otherwise, the switcher may not work properly

• To use keyboard hotkey switching, the keyboard must be connected to the USB 1.1 Type A port

• Please connect the printer to the USB 2.0 Type A port. And before use, please install the printer driver on the computer

• In order to prevent the USB KVM switch from generating overcurrent, overcurrent protection is designed. The maximum current is 1A. Therefore, it is not recommended to use external hard drives with this switch