QC3.0 Fast Charging Mobile Power Set Power Bank Shell Assembly Kit(Black/No Battery)

1. Power: 18W (dual USB output + TYPE-C port/Android port dual input solution)
2. OUT 1 output: 5V/3A
3. OUT 2 output (orange USB): 5V/3A, 9V/2A, 12V/1.5A (support 5V charging and discharging)
4. IN input (micro Android port): 5V/3A, 9V/2A
5. Type-C output: 5V/3A, 9V/2A, 12V/1.5A (only output is available when PD protocol is supported)
6. Type-C input: 5V/3A, 9V/2A, 12V/1.5A
7. Other functions: long press to turn on the flashlight, double-click to turn off the output; the motherboard will not burn if installed
8. Battery requirements: flat head 18650 battery without protection board (65MM length), internal resistance within 60 milliohms, 9. discharge above 2C; fast charge power is large, using disassembled battery will affect the experience
10. Quick charge specification: OUT 2 (orange USB)
11. Weight: about 90 grams
12. Size: 15x2 may be around


Charging specifications:
1. Battery end: adaptive charging current adjustment, charging current up to 5A (the first charge to 99 percent will be slower to 100 percent, because the identification battery can reach a safe voltage, please be patient)

Discharge specification:
1. Support line compensation, synchronous switch discharge 5V/2A efficiency can reach more than 95 percent
2. Multiple protections and high reliability: built-in input over-voltage and under-voltage protection; integrated output over-current, over-voltage, and short-circuit protection; built-in battery over-charge, over-discharge, and over-current protection; built-in IC over-temperature protection; integrated charging Discharge battery temperature NTC protection
3. ESD 4KV, input (including CC pin) withstand voltage 25V


Note: After the battery is inserted, the power bank must be charged and activated before the output will be output; the product only contains the motherboard and the shell, no battery, no power cord