Frequently bought together:
Description
CT102 Astronaut Design WiFi Camera Two-way Voice Call HD 1080P Night Vision Home Security Camcorder Wireless Surveillance Camera - White
- It is easy to use, fully wireless, no need to pull cables, with a privacy cover to prevent hackers from intruding and prying into the privacy
- The image is clear and smooth, and the intelligent transmission exerts the limits of the network
- The device can be waked up remotely, the head can be rotated 180° left and right by the mobile phone app, and the goggles can be up and down 75°
- Standard H.264: Low code rate, high-quality images, strong fault tolerance, strong network adaptability
- Support remote monitoring, remote viewing, two-way voice intercom, echo cancellation, and noise suppression
- Support Android, IOS smart terminal remote real-time monitoring
- 200W HD pixels (1920X1080), clear picture quality
- Single light source night vision lighting (night vision distance 6 meters), infrared lamp fill light, realize night vision image effect
- Built-in rechargeable lithium battery, long battery life, up to 2 months of normal work, 12 months of standby time
- Support 2.4G Wi-Fi (IEEE802.11b/g/n)
- Support TF card (up to 128GB) storage, mobile phone recording
- Support point-to-point short-distance connection to the distribution network
- Support human body detection, intelligent push
- Detachable base, the base is pasted with non-slip pad
Specification:
Main processor | SOC | Ingenic T31 | ||||
DDR | 64M Bytes | |||||
Image Sensor | Sensor | 1/2.9 color CMOS sensor | ||||
IR-CUT | Color black and white switcher | |||||
Lens | M12 f3.7MM F.2.0 2OOW | |||||
Viewing angle | H (horizontal) 89 degrees; V vertical 52 degrees: D diagonally 108 degrees | |||||
Minimum illumination | 0.01Lux | |||||
Audio | input Output | Two-way voice intercom can be realized (built-in microphone and speaker) | ||||
Audio compression method | G711A | |||||
video | compression method | H.264 | ||||
Lighting frequency | 50Hz | |||||
Image frame rate | 20ps | |||||
Maximum image resolution | 1920*1080P | |||||
Night vision light source | 14mil infrared light (940nM wavelength), irradiation distance: 6 meters | |||||
The internet | Wi-Fi | 2.4G Wi-Fi (IEEE802.11b/g/n), built-in antenna | ||||
supporting agreement | TCP/IP, UDP/IP, DHCP | |||||
Support IP address | Support wireless wifi, dynamic IP address | |||||
AI | Human detection | Support human body detection (4-5 meters), smart push, remote wake-up | ||||
Alarm method | Alarm notification | Mobile APP message push | ||||
wake | Wake-up method | PIR human body induction wakeup, remote active wakeup | ||||
Video | Video mode | Alarm trigger, manual recording, all day recording | ||||
Video storage | Local TF card, mobile phone memory | |||||
Indicator light | LED indication | RGB three-color light, power/point-to-point mode/remote mode | ||||
Battery | capacity | 3000mah (protection mode: overcurrent/over-discharge/overcharge/short circuit/high and low temperature charging protection) | ||||
Detachability | Removable arm and base | |||||
usage time | 2 months (depending on the situation of wake-up) | |||||
Standby time | 1 year | |||||
Charging voltage | DV 5V±5%/2A | |||||
Charging time | Within 6 hours | |||||
Power consumption | Standby power consumption | (3.7V 0.18mA) | ||||
Working power during the day | (3.7V 230mA) | |||||
Working power consumption at night | (3.7V 400mA) | |||||
interface | power supply | Type-C interface | ||||
Memory card | 1 TF card (up to 128GB) | |||||
Button | 1 reset button, 1 turn on/off button | |||||
Environment | working environment | -10° ~ 45°C /0% ~ 80% (non-condensing) | ||||
Storage environment | -20°C ~ 60° /0% ~ 90% (non-condensation) | |||||
General | Dimensions (LxWxH) | Body: 18cm (height) x 15cm (length) x 9cm (width) Base diameter: 8.5cm |
||||
Net weight | 403g | |||||
Material | ABS |