D52-2066 Energy Meter 6-in-1 Din Rail AC Monitor 110V 220V 380V 100A Voltage Current Power Factor KWH Electric Energy Frequency Meter VOLT AMP - AC 40/300V 100A

• Measurement: 40-300V for grid, photovoltaic, inverter current; 250-450V only for 380V

• Electric Power: 0-450000W, 0.1W for measuring 0-9999.9W, otherwise 1W

• Electric Energy: 0-99999kwh, 0.01kwh electric energy hour/electric energy resolution for measurement 0-999.99kwh, 0.1kwh for measurement 1000.0-9999.9kwh, 1kwh for 9999.9kwh

Specifications:

• Accuracy: 1% ± 2 words

• Speed: 2 times per second

• Size: 54×80×64mm

• Installation: Din-Rail

• AC current: AC 0 -100.0A, the current resolution is 0.01A.

• Frequency: 45.0Hz – 65.0Hz

• Power factor: 0.00-1.00PF

• AC voltage: AC 40.0-300.0V or AC 250.0-450.0V

• Use:

• 1. Connect the measuring voltage to terminals 1 and 2.

• 2. The connection between the instrument and the internal current transformer is shown in Figure 1. Pass the wire through the hole on the instrument, and choose any direction.

• 3. The connection between the instrument and the external current transformer is shown in Figure 2. Pass the wires through the holes on the instrument and connect the two wires of the secondary transformer to terminals 3 and 4.

• 4. When turned on, the meter displays the measurement parameters.

• 5. When powered on, press and hold the SAM CK button for 5 seconds. After releasing the button, the power will return to zero and start accumulating. And when the power is turned off, the meter can save the electric energy value and continue to accumulate data when the power is next turned on.

Note: The meter can only be used to measure 45-65Hz AC.