Description
150M 1080P HDMI Extender 1080P Over Cat5 Cat6 Cat7 Cable Transmitter+Receiver Support IR Network Extender - US Plug
This HDMI 150m cable extender follows the TCP/IP network protocol standard. It can transmit HDMI signal to 395 feet through CAT5e/6 cable(150 meters) distance. With the advantages of the TCP/IP standard, you can use an Ethernet switch to extend your HD video to multiple monitors.
Follow the TCP/IP network protocol standard
Support POE switch power supply without additional power supply
The transmitter supports the loop-out function
Support HDMI 1.3 version, backward compatible
Compatible with HDCP1.1 & 1.2 protocol
Specification:
HDMI resolution: 480p, 576p, 720p, 1080p
Audio Sampling Rate: 32kHz, 44.1kHz, 48kHz, 38KHz
HDMI version: HDMI 1.3
HDCP version: HDCP 1.2
Power adapter input: 100V-240V (50-60Hz)
Power adapter output: 12V/1A
Power consumption: Transmitter: 3.1W, Receiver: 2.6W
Operating temperature/humidity: 0-70?/10%-80%RH (no condensation)
Storage temperature/humidity: -10-80?/5% -90%RH (non-condensing)
Size: 100x100x25mm
Weight: 880g
Note:
1. After turning on the power, the product needs 16 seconds to start the system until the green light is on. Please do not perform any operations during this period, please be patient!
2. When this product is connected to the POE switch, please do not use any power adapter!
3. When working in point-to-multi-device mode, the sender and all receivers must be set to different IP addresses and for MAC addresses, and the gateway and IP must be in the same network segment.